Contact Us

Tel:+86-579-89208799

Fax:+86-579-89208795

Mob:+86-18858938261

E-mail:manager@kids-scooter.com

Add:No.338 Shifang West Road, Huku Industry Zone, Yongkang, Zhejiang, China

Home > News > Content
Ride On Toy Stability And Overload Requirements May 23, 2017

 Ride on Toy Ride the stability of the toy and overload requirements

 1. Purpose To reduce the risk of accidents that may be caused by easily dumped toys This requirement takes into account the stabilization of the child's legs and recognizes the instincts of the child to adjust the balance in a tilted state. This requirement applies to children who are used for 60 months or less Toys, with three or more load wheels of the ride toys, such as various vehicles, ride the activities of toys, such as Trojans, seat fixed toys, such as toy furniture. Generally does not apply to the base of the ball without stability, cylindrical As well as other shapes of riding toys.

2. Toy stability test must meet the requirements before and after the abuse test.

3. (Stability test of riding a toy)

 Ride on Toy Place the toy on a smooth slope with a 10 degree tilt angle with the horizontal plane (some tests require a slope of 15 degrees).

 B. Plug the wheel with a plug to limit its rotation, but allow the self-aligning wheel to be in a natural position before placing the plug.

 C. If there is a handling device, turn the operating device to the position where the toy is most likely to be overturned.

D. Apply a static load to the seat, the weight of the load is the same as the maximum age in the age group for which the toy is used, but not exceeding 60 months. When the toy is placed on a specified slope, the load must be applied to its main shaft The load should be designed according to its center of gravity height of 8.8in (220mm). For all riding toys, the load center of gravity should be fixed in the designated area of the front area of the largest part of the back 1.7in (43mm) And the area with the largest area behind the designated seating area forwards 1.7in (43mm). If the seat area is not specified, the above load should be placed on the grounds that the child will choose to sit The most unfavorable position.

4. Ride on Toy This requirement considers that there are two types of potential hazards that may occur: one is the stabilization of the foot on the ride or the seat, and the other is the foot by the closed structure and can not stabilize.